filter-press-types

Filter press types

Giá: Liên hệ
Mã SP: DDTP
Nhà sản xuất: Đang cập nhậtĐẠI ĐỒNG TIẾN PHÁT
Bảo hành: Đang cập nhật
Số lượng:

Filter press types

Chamber filter presses are reliable and robust in many different applications. The plate pack consists of uniform chamber plates with a recess of 15-50 mm to receive the filter cake. The standard material for chamber plates is polypropylene. Possible operating pressures: 6 bar, 15 bar and 30 bar.

Hình ảnh: Filter press

1. Membrane filter presses:

Membrane filter plates are designed just like the chamber plates described above. A flexible membrane is fixed to the support body. Materials for the membranes include polypropylene, synthetic rubber (e.g. NBR, EPDM), or thermoplastic elastomer (TPE). Special materials are also available, such as PVDF. The membrane is impermeable and compresses the cake within the chamber after the filtration process is complete. Liquid or gas (compressed air) can be used as membrane inflation media. In order to guarantee maximum protection for the membrane filter press, we use special safety systems for the various membrane inflation media. Inflation pressures up to 30 bar are possible, and in special cases even higher.

2. Plate & frame filter presses - sheet filters:

The chambers of this type of filter press are formed by combining polypropylene filter plates and frames. This creates chambers of 5-40 mm, depending on frame thickness. Plate and frame type filter presses are suitable for pre-coating filtration, which in the beverage industry is used for clear filtration. ANDRITZ supplies plate and frame type filter presses for operating pressures up to 6 bar.

Hình ảnh & Video clip đang được cập nhật.
Viết bình luận cho sản phẩm:

Vui lòng thực hiện các vấn đề dưới đây:

Từ khóa liên quan: filter press types, may ep bun nuoc thai,